Product Length/Depth

190 mm

Product Height

220 mm

Product Width

190 mm

Product Weight

2.046 kg

Compliances

UL/CSA

IEC

RoHS conform

Certifications

CSA (Class No. 1437-01)

UL listed

CSA-C22.2 No. 5-09

UL (Category Control Number DIHS)

CE marking

CSA (File No. 22086)

UL489

IEC60947

UL (File No. E140305)

CSA certified

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Frame

NZM2

10.4 Clearances and creepage distances

Meets the product standard's requirements.

Suitable for

Emergency stop

Switch disconnector

Power circuit breaker

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

Fitted with:

Black and yellow lightning symbol

Extension shaft

Door coupling rotary handle

External warning plate/marking plate in German/English

Special short extension shaft

Mounting brackets

Padlock

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

Special features

External warning plate/designation label can be clipped on.

For enhanced busbar tag shroud on the incomer side, please order IP2X protection against contact with a finger.

Kit for use as a main switch

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

Color

Black

Degree of protection / NEMA enclosure type

IP66

4X. 12

Features

Lockable

Red-yellow for emergency switching off

For direct mounting of circuit-breaker and handle in the side wall of the control cabinet

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

Type

Accessory

Main switch assembly kit for side panel mounting

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard's requirements.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

Used with

PN2(-4)

N(S)2(-4)

NZM2(-4)

Cover/door type

Narrowest minimum clearance between enclosure side plates of control panel and circuit breaker is defined by mounting bracket.

Door interlock extension cannot be used.

Door interlock lockable in 0 position on handle

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

Activation type

Actuation on the right