Product Length/Depth

145 mm

Product Height

130 mm

Product Width

115 mm

Product Weight

0.56 kg

Compliances

IEC

UL/CSA

RoHS conform

Certifications

UL489

CSA (File No. 22086)

CE marking

CSA-C22.2 No. 5-09

CSA (Class No. 1437-01)

UL (File No. E140305)

UL listed

CSA certified

UL (Category Control Number DIHS)

IEC60947

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Frame

NZM1

10.4 Clearances and creepage distances

Meets the product standard's requirements.

Suitable for

Emergency stop

Power circuit breaker

Switch disconnector

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

Locking facility

Lockable on the 0 position on the handle using up to 3 padlocks

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

Fitted with:

Extension shaft

Padlock

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

Special features

For direct rear connection of the switch to the side of the control panel or control panel door.

Switch actuation on rear through side plate or control panel door.

For switch with toggle lever

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

Color

Red

Degree of protection / NEMA enclosure type

IP66

4X. 12

Features

Lockable

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

Type

Accessory

On rear drive

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard's requirements.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

Used with

NZM1, N1, NS1, PN1

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.