QT636
Quantec Interface Unit c/w Remote Socket
Trade Price
£47.07
Per
1
Unit
EACH
Pack Quantity
Information
Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation). Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller. When the device connected to the QT636 is operated a call will be generated on the Quantec call system as programmed. Mounts on a standard UK 25mm single gang back box.
Technical Specifications
Quiescent current
1mA.
Alarm current
1mA.
Connections
N-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia care controller.
Onboard 6.35mm Remote Jack Socket
Yes, can be configured to accept a n/o or n/c jack plug.
Onboard Sounder
No,
Onboard Infrared Receiver
No.
Product dimensions (mm)
87 W x 87 H x 33 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finish
Plastic.
IP Rating
IP20.
Weight
68g
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Product dimensions:
87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Document Links
Datasheet