QT604
Quantec Monitoring Point, Button Reset
Trade Price
£61.03
Per
1
Unit
EACH
Pack Quantity
Information
A keyswitch-isolatable monitoring point c/w a RESET button for cancelling calls. Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is opened (via magnetic contacts) or a telephone or door bell rings. Can be used to monitor any device with a normally open or normally closed switch – ideal for interfacing PIRs, strip switches, flow switches and other devices to Quantec. Red/green reassurance LED. When isolated, the QT604’s reassurance LED will illuminate Green and the monitored door or device may be opened and closed without signalling a call on the system. Mounts on a standard UK 25mm single gang flush or surface back box. QT604M secure magnetic reset version also available.
Technical Specifications
Quiescent current
TBC.
Alarm current
TBC.
Indicators
Red/Green Reassurance LED (lit green when device is isolated).
Controls
Isolation keyswitch (switches monitoring off when ISOLATED); Reset button (cancels calls made from the monitoring point and from devices wired on the same Zone). Note that a QT604M magnetic reset v
Connections
Net +: Net -; R; G; L+; SW
Expansion connections
R (Red) and G (Green) connections allow the connection of an optional slave overdoor light. Alternatively G (Green) and SW (Switch) can be used for an optional Call Alert Unit allowing telephone mo
Onboard 6.35mm Remote Jack Socket
No.
Onboard Infrared Receiver
No.
Product dimensions (mm)
87 W x 87 H x 29 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish
Plastic.
IP Rating
IP41.
Weight
90g.
Operating conditions/temperature
-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Product dimensions:
87 W x 87 H x 24 D mm. Mounts on a 25mm UK single gang back box.
Document Links
Datasheet