ZREP1F
ZFP Compact Controller (Flush). Apollo Protocol.
Trade Price
£735.00
Per
1
Unit
EACH
Pack Quantity
Information
An optional ZFP Apollo network device that can be used as a traditional but compact repeater panel with added functionality. Includes a Z41 Touchscreen Control Module and ZHN ‘Hi-Net’ multi-path fault-tolerant network PCB. Housed in an stylish flush mounting plastic enclosure measuring just 214mm x 178mm. Can be used to an enhance a building’s reception area and access points (locate your main ZFP panels out of sight and let our ZFP Compact Controllers add a touch of class to your surroundings). Full Access Level 2 functionality (silence, disable, reset, etc). Requires a separate EN54-4 boxed PSU such as C-TEC’s BF360-24 1A 24V boxed PSU. Up to 64 Compact Controllers can be connected to a ZFP network (each controller classed as 1 network node). Glazed stainless steel frames (ZBEZDC/SS) and vertical and horizontal alignment plates (ZMBOXAL & ZMBOXAS) also available.
Technical Specifications
Protocol/compatibility
Apollo.
Power requirements
Requires a separate EN54-4 PSU such as C-TEC's BF360-24 1.5A 24V boxed PSU.
Indicators
Full-colour 480 x 272 pixel touchscreen; 16 LEDS (11 reserved for mandatory EN54 indicators).
Controls
Interactive touchscreen with menu sensitive buttons; 1 x keyswitch allowing direct access to Access Level 2. Keyswitch requires S-KEY fire panel key.
Product dimensions (mm)
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
Construction & finish
Plastic detachable lid and back box. RAL7035.
IP Rating
IP41.
Weight
1.27kg (unpacked).
Operating conditions/temperature
-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Notes
Up to 64 ZFP Compact Controllers can be connected to a ZFP 'Hi-Net' Network. See Instructions for further details.
Product dimensions:
214 W x 178 H x 70 D mm..
Hole required for flush mounting:
176 W x 162 H x 55 D mm. No bezel required.
Document Links
Datasheet