NC920F
20 Zone Master Call Controller c/w 300mA PSU (Flush Version)
Trade Price
£334.63
Per
1
Unit
EACH
Pack Quantity
Information
Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive flush mounting plastic enclosure measuring just 214mm x 178mm Two call levels – standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call. Innovative slide-in labelling system. Zones can be wired in 4 or 6 core (7/02) stranded security cable. Additional master controllers and expansion units available for use as repeaters on larger sites. Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required.
Technical Specifications
Mains supply
230V 50/60Hz. (36mA max. current).
Internal power supply
11V d.c. (300mA max. current when powered by Mains).
Quiescent current
0mA (none).
Alarm current
Determined by the number/type of field devices connected to the call controller/system.
Auxiliary relays
2 volt free relay contacts (NO/C/NC). Activate when a standard or emergency call is received by the controller. Both relays rated at 30V d.c. @ 1A.
Auxiliary inputs
External PSU Input: 9V-15V d.c. @ 400mA (suitable for use with an BF560-12 12V 2A boxed PSU which has space available for a 12V 7AH battery).
Indicators
Green Power on LED; 20 x red Zonal Alarm LEDs (lit steady for a Standard call, pulse for an Emergency call); Internal buzzer (on steady for any Standard call, intermittent for any Emergency call).
Controls
2 Buttons – (A) Reset or inactive ; (B) 'Mute' or 'Call Accept'. (Both buttons are link selectable). If Call Accept is selected indicators on relevant field devices will emit a slow intermittent to
Expansion connections
CONN2 allows the connection of 1 x NC910EF 10 Zone Expansion Unit or 1x NC920EF 20 Zone Expansion Unit.
Call acknowledgement functionality
Yes.
Product dimensions (mm)
214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
Construction & finish
Plastic detachable lid and back box. RAL7035.
IP Rating
IP41.
Weight
1.47kg.
Operating conditions/temperature
-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Product dimensions:
214 W x 178 H x 70 D mm.
Hole required for flush mounting:
176 W x 162 H x 55 D mm. No bezel required.
Document Links
Datasheet