45681-510APO
AlarmSense Base Sounder
Trade Price
£53.26
Per
1
Unit
EACH
Pack Quantity
Information
Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point. 70d-87dB(A) sound output. Certified to EN54-3 by UL International (UK) Limited. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. AlarmSense priority/non priority signal recognition Detects the removal of a detector head and reports a fault Continues to work during unauthorised removal of detector. High and low volume ranges Red and white caps available for stand-alone use. Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).
Technical Specifications
Approvals/certifications
Certified to EN54- by by UL International (UK) Limited.
Application/operation
Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use.
Supply wiring
2-wire monitored, polarity insensitive.
Supply/operating voltage
18-33VDC (sounders active); Less than 15VDC (sounders off).
Quiescent current
Less than 20µA @ 12VDC.
Nominal SPL (Sound Pressure Level)
87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting).
Alarm current
5mA (sounder active current at 24V).
Product dimensions (mm)
115mm diameter x 40mm deep (without optional AlarmSense detector).
Construction & finish
White polycarbonate. Red and white caps available for stand alone use.
IP Rating
TBC.
Weight
150g
BF330ASLIDR
AlarmSense 45681-295 Red Cap
BF330ASLIDW
AlarmSense 45681-294 White Cap
Document Links
Datasheet