ABE7S16E2B1
TF2 16CH ISOLATED I 24VDC
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with soldered solid state output relay, provides 16 channels. It has 2 terminals per channel. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a current of 0.012A per channel. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.37kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Technical Specifications
Range of product
Modicon ABE7
Product or component type
Solid state input relay sub-base
[Us] rated supply voltage
24 V DC (PLC end) 24 V DC (sensor end)
Number of channels
16
Number of terminal per channel
2
Connections - terminals
Screw type terminals, 1 x 0.09...1 x 1.5 mm², 0.09…1.5 mm² (AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm², 0.14…2.5 mm² (AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm², 0.14…2.5 mm² (AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm², 0.09…0.75 mm² (AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm², 0.2…2.5 mm² (AWG 24...AWG 14) solid
Terminal block type
Removable
Supply voltage limits
19…30 V DC (PLC end) conforming to IEC 61131-2
Isolation PLC/operative part
Yes
Protection type
Internal fuse 1 A 5 x 20 mm fast blow PLC end Adjustable by external fuse fast blow sensor end
Fixing mode
By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit)
Current per channel
0.012 A
Current state 1 guaranteed
>= 2 mA (sensor end)
Voltage state 1 guaranteed
>= 15 V for sensor end
Maximum switching current
15 mA (PLC end)
Minimum switching current
1 mA for PLC end
Response time
<= 0.05 ms from state 0 to 1 <= 0.4 ms from state 1 to 0
Switching frequency
<= 1000 Hz duty cycle: 50 %
[Uimp] rated impulse withstand voltage
2.5 kV conforming to IEC 60947-1
[Ui] rated insulation voltage
2000 V
Installation category
II conforming to IEC 60664-1
Tightening torque
0.6 N.m with flat Ø 3.5 mm screwdriver
Net weight
0.37 kg
Dielectric strength
2000 V at 50/60 Hz conforming to IEC 60947-1
product certifications
UL DNV CSA GL EAC
standards
IEC 61131-2 Type 1
IP degree of protection
IP2X conforming to IEC 60529
Resistance to incandescent wire
750 °C conforming to IEC 60695-2-11
Shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance
2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge
4 kV (contact) level 3 conforming to IEC 61000-4-2 8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields
10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients
2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation
-5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage
-40…80 °C conforming to IEC 61131-2
Pollution degree
2 conforming to IEC 60664-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.0 cm
Package 1 Width
8.3 cm
Package 1 Length
21.0 cm
Package 1 Weight
438.0 g
Unit Type of Package 2
S03
Number of Units in Package 2
16
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
7.478 kg
Warranty
18 months