Trade Price
£145.64
Per
1
Unit
EA
Pack Quantity
1
This PowerTag A9 M63 1PW for Acti 9 and Multi 9 Monoconnect offers is a Class 1 wireless-communication energy sensor. It is dedicated to Acti9 and Multi9 1P Monoconnect devices rating less than or equal 63A. The neutral blue wire is to be connected to a neutral terminal block. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. The degree of protection is IP20 and IK05 The Operating temperature is between -25°C to +60°C. The Storage temperature is between 40°C to +85°C. The Performance category is Class 1. PowerTag Energy 63A complies with IEC 61557-12 standard.
Range of product
PowerLogic
Product name
PowerTag A9 M63
Product or component type
Energy sensor
Poles
1P
Maximum current [Imax]
63 A
[Ib] basic current
10 A
starting current
40 mA
Saturation current
130 A
Product specific application
Load monitoring Overload alarm Cost allocation Circuit monitoring Energy management
Concentrator compatibility
Acti9 Smartlink SI B Acti9 Smartlink SI D Acti9 PowerTag Link C Acti9 PowerTag Link Acti9 PowerTag Link HD Wiser IP module EcoStruxure Panel Server Universal EcoStruxure Panel Server Advanced PrismaSet Active
Range compatibility
Acti 9 Acti9 iKQE RCBO Multi9 Multi9 C60 Multi9 Multi9 ID Multi9 Multi9 C32N Multi9 Multi9 C65 Acti 9 Acti9 iID Acti 9 Acti9 iID K Acti 9 Acti9 iK60 Acti 9 Acti9 iKQ Acti 9 Acti9 K60 Acti 9 Acti9 Reflex iC60 Acti 9 Acti9 iC65 Acti 9 Acti9 DT60 Acti 9 Acti9 iC60 single terminal
Type of measurement
Voltage Power factor Active energy Current Active power
Accuracy class
Class 1 current conforming to IEC 61557-12 Class 0.5 voltage conforming to IEC 61557-12 Class 1 active power conforming to IEC 61557-12 Class 1 active energy conforming to IEC 61557-12 Class 1 power factor conforming to IEC 61557-12
Mounting location
Top or bottom
mounting support
On circuit breaker
Product destination
Switchboard
Event management
Voltage loss with measured current at voltage loss
Transmission support medium
Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4
maximum emission power
10 mW
Mounting mode
By screws (terminals)
Electrical connection (voltage sensing & power supply)
Connector tooth and wire
Cable cross section
1 rigid cable 1.5…16 mm² 2 stranded cable 1.5…2.5 mm² 2 rigid cable 1.5…2.5 mm² 1 stranded cable 1.5…16 mm²
Cable length
1 m
supply voltage
200...240 V AC, +/- 20 %
cable composition
1 x 0.33 mm²
Network frequency
50 Hz 60 Hz
Maximum power consumption
1 VA
Standards
IEC 61557-12 IEC 61010-1 IEC 61010-2-030 IEC 61326-1 ETSI EN 300 328 ETSI EN 301 487-1
Height
16.5 mm
Width
18 mm
Depth
43 mm
Net weight
16.4 g
Colour
White (RAL 9003)
Quality labels
CE
Directives
2014/53/EU - radio equipment directive
Operating altitude
0...2000 m
Ambient air temperature for operation
-25…60 °C
Ambient air temperature for storage
-40…85 °C
Overvoltage category
III conforming to IEC 61010-1
Measurement category
Category III conforming to IEC 61010-2-030
IP degree of protection
IP20 conforming to IEC 60529
IK degree of protection
IK05
Pollution degree
3
Relative humidity
0…95 % at 45 °C conforming to IEC 60721-3-3
Vibration resistance
3M4 conforming to IEC 60721-3-3
Electromagnetic compatibility
Industrial electromagnetic environment conforming to IEC 61326-1 Radiated EMC conforming to ETSI EN 301 489-17 Electromagnetic emission conforming to IEC 62311
environmental characteristics
Dustproof class 3S3 conforming to IEC 60721-3-3 Salt mist class 3C2 conforming to IEC 60721-3-3 Indoor use
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.000 cm
Package 1 Width
6.200 cm
Package 1 Length
8.500 cm
Package 1 Weight
45.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
48
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
2.470 kg
Warranty
18 months
Datasheet