XPER110
FOOT SWITCH
Trade Price
£159.31
Per
1
Unit
EA
Pack Quantity
1
Information
This XPE orange, metal, single foot switch is an ideal solution for providing start and stop instructions for many types of industrial machines, running in various operating modes like normal (pulsed) start, inching, hold to run. It is designed such that the operating pedal is close to the ground and at a comfortable angle. It is delivered without a protective cover, this makes it suitable for applications where the issuing of the start instruction presents a reduced level of danger. It incorporates snap action contacts with positive opening operation. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66.
Technical Specifications
Range of product
Harmony XPE
Product or component type
Foot switch
Material
Metal
Foot switch type
Single foot switch
Device short name
XPER
Trigger mechanism
Without trigger mechanism
contact operation
1 step
Contacts type and composition
1 NC + 1 NO
Colour
Orange
Positive opening
With conforming to EN/IEC 60947-5-1 appendix K
Connections - terminals
Screw clamp terminal, <= 1 x 2.5 mm² with or without cable end Screw clamp terminal, <= 2 x 1.5 mm² with or without cable end
Cable entry
2 entries tapped for Pg 16 cable gland
Mechanical durability
15000000 cycles
[Ie] rated operational current
3 A, 240 V, AC-15, A300 0.27 A, 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1 appendix A
[Ui] rated insulation voltage
500 V (pollution degree 3) conforming to EN/IEC 60947-1 500 V (pollution degree 3) conforming to NF C 20-040 group C 500 V (pollution degree 3) conforming to VDE 0110 group C 300 V conforming to UL 508 300 V conforming to CSA C22.2 No 14
[Uimp] rated impulse withstand voltage
6 kV conforming to EN/IEC 60947-1
Maximum resistance across terminals
25 MOhm conforming to IEC 60255-7 category 3 25 MOhm conforming to NF C 93-050 method A
Short-circuit protection
10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 10 A cartridge fuse type gG conforming to VDE 0660-200
Rated operational power in W
10 W DC-13, operating rate <60 cyc/mn, 5000000 cycles, 24 V, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 4 W DC-13, operating rate <60 cyc/mn, 5000000 cycles, 120 V, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 7 W DC-13, operating rate <60 cyc/mn, 5000000 cycles, 48 V, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C
Net weight
1.2 kg
standards
EN/IEC 60947-5-1 VDE 0660-200
product certifications
FIMKO
Protective treatment
TC
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
Shock resistance
150 gn conforming to NF E 09-031 20 gn conforming to IEC 60068-2-27
Overvoltage category
Class I conforming to EN/IEC 61140 Class I conforming to NF C 20-030
IP degree of protection
IP66 conforming to IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.400 cm
Package 1 Width
12.000 cm
Package 1 Length
18.600 cm
Package 1 Weight
1.368 kg
Unit Type of Package 2
S02
Number of Units in Package 2
4
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
5.709 kg
Unit Type of Package 3
P06
Number of Units in Package 3
64
Package 3 Height
75.000 cm
Package 3 Width
60.000 cm
Package 3 Length
80.000 cm
Package 3 Weight
103.012 kg
Warranty
18 months
Document Links
Datasheet