Trade Price
£831.67
Per
1
Unit
EA
Pack Quantity
1
For small to medium businesses, Schneider Electric offers this single phase Easy UPS designed for essential power protection needs even in the most unstable power conditions. This 1000VA double-conversion on-line 4U rackmount UPS provides pure sine wave power to handle a wide voltage range and inconsistent power conditions. The SRVS comes with IEC 320 C14 input and 3x IEC 320 C13 outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGLS9901I) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The SRVS UPS is compatible with replacement battery cartridge APCRBCV200. The Easy UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.
Presentation
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
Lead time
Usually in Stock
Main Input Voltage
230 V
Product or component type
Uninterruptible power supply (UPS)
Other Input Voltage
220 V 240 V
Main Output Voltage
230 V
Other Output Voltage
220 V 240 V
Rated power in W
800 W
Rated power in VA
1000 VA
Input Connection Type
IEC 60320 C14
output connection type
3 IEC 60320 C13
Number of rack unit
4U
Number of cables
1
Provided equipment
1 IEC 60320 C13 to Schuko power cable 1 IEC 60320 C13 to C14 power cable 1 USB cable 1 RS-232 configuration cable 1 external battery pack 1 battery cable 2 rack mounting brackets user manual
Run Time
View Runtime Graph
Efficiency
88 % (full load)
Battery type
Lead-acid battery
Battery voltage
36 V
Number of battery filled slots
0
Number of battery free slots
0
Battery recharge time
4 h
Battery life
3…5 year(s)
Battery charger power
175 W rated
Number of power module filled slots
0
Number of power module free slots
0
Redundant
No
Colour
Black (RAL 7010)
height
17.2 cm
Width
43.8 cm
Depth
41.2 cm
Net weight
27 kg
Mounting location
Front
Mounting preference
Lower
Mounting mode
Rack-mounted
USB compatible
Yes
Mounting position
Horizontal
Input voltage limits
110...285 V half load 160...280 V full load
Network frequency
40...70 Hz auto sensing
Maximum configurable power in VA
1000 VA
Maximum configurable power in W
800 W
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Harmonic distortion
3 %
UPS type
Double conversion online
Wave type
Sine wave
Additional information
Configurable for 220 : 230 or 240 nominal output voltage
bypass type
Internal bypass (automatic and manual)
Crest factor
3 : 1
product certifications
CE UKCA
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...3000 m
Ambient air temperature for storage
-20…50 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0…15000 m
Acoustic level
50 dBA
Heat dissipation
372 Btu/h
IP degree of protection
IP20
Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
control panel
Multifunction LCD status and control console
Surge energy rate
600 J
Unit Type of Package 1
PCE
Number of Units in Package 1
3
Package 1 Height
48 cm
Package 1 Width
50 cm
Package 1 Length
60 cm
Package 1 Weight
33.5 kg
Warranty
2 years repair or replace
Datasheet