Trade Price
£19,199.33
Per
1
Unit
EA
Pack Quantity
1
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 20kVA on-line rack/tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire(1P+N+E) and 5-wire(3P+N+E) inputs, 3-wire(1P+N+E) and 5-wire(3P+N+E) outlets. The UPS has an embedded Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. The UPS is compatible with SRTGRK1 rail kit sold separately.
Lead time
Usually in Stock
Main Input Voltage
380...415 V 3 phases 230 V
Other Input Voltage
220...240 V
Main Output Voltage
380...415 V 3 phases 230 V 1 phase
Other Output Voltage
230 V
Rated power in W
20000 W
Rated power in VA
20000 VA
Output connector type
Hard wire 5 wire (3P + N + E) 1 Hard wire 3-wire (1P + N + E) 1 IEC connector 3-wire (1P + N + E) 1
Number of rack unit
7U
Battery type
Lead-acid battery
Provided equipment
1 x USB cable 1 x rack mounting brackets 1 x stabilization/wall mounting feet 1 x installation manual
Run Time
View Runtime Graph
Efficiency
94 % (in battery operation)
Number of battery filled slots
0
Number of battery free slots
0
Battery recharge time
4 h
Number of battery replacement quantity
2
Additional information
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Battery voltage
+/- 192 V
Battery charger power
2160 W rated
Battery life
3…5 year(s)
Replacement battery
APCRBC172
Extended runtime
1
UPS type
Double conversion online
Number of power module free slots
0
Number of power module filled slots
0
Redundant
No
Colour
Black
height
30.6 cm
Width
440 mm
Depth
70.0 cm
Net weight
142.5 kg
Mounting location
Front
Mounting preference
Lower
Mounting mode
Rack-mounted
Two post mountable
0
USB compatible
Yes
Mounting position
Horizontal
Network frequency
40...70 Hz auto-sensing
Number of input connectors
1 hard wire 5 wire (3P + N + E) 1 hard wire 3-wire (1P + N + E)
Input voltage limits
160...285 V full load 380 V 380...415 V
Maximum input current
87 A
Switching current capacity
125 A
Input harmonic distortion
Less than 5 % for full load
Input current
87 A
Load power factor
From 0.9 leading to 1 lagging
Maximum configurable power in VA
20000 VA
Maximum configurable power in W
20000 W
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Wave type
Sine wave
Output overload operation
60 seconds at 125% and 30 seconds at 150%
Half load runtime
00:09:30 10000 W
Full load runtime
00:03:30 20000 W
Harmonic distortion
Less than 5 %
Crest factor
3 : 1
bypass type
Internal bypass (automatic and manual)
product certifications
CE
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 60204-2
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...3000 m
Ambient air temperature for storage
-15…45 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0…15000 m
Acoustic level
58 dBA
Heat dissipation
3821 Btu/h
IP degree of protection
IP20
Free slots
0
Preinstalled device
Network management card 3 with environmental monitoring
Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power off
Yes
Surge energy rate
600 J
Noise suppression
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
535 mm
Package 1 Width
790 mm
Package 1 Length
590 mm
Package 1 Weight
157.2 kg
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Datasheet