Trade Price
£8,856.97
Per
1
Unit
EA
Pack Quantity
1
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 6kVA on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire input, 6x IEC 320 C13, 4x IEC 320 C19 outlets, and 2x IEC jumper cables. The UPS has an embedded Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. It has an additional SmartSlot for optional accessory card such as Dry Contact I/O card. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. It conforms to CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, and VDE. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.
Presentation
High density, double-conversion on-line power protection with scalable runtime.
Lead time
Usually in Stock
Main Input Voltage
230 V
Other Input Voltage
220 V 240 V
Main Output Voltage
230 V
Other Output Voltage
220 V 240 V
Rated power in W
6000 W
Rated power in VA
6000 VA
output connection type
6 IEC 60320 C13 2 IEC Jumpers 4 IEC 60320 C19
Output connector type
Hard wire 3-wire (H N + E) 1
Number of rack unit
4U
Battery type
Lead-acid battery
Provided equipment
CD with software Installation guide Rack mounting hardware Rack mounting brackets Rack mounting support rails Temperature probe USB cable Warranty card Web/SNMP management card
Run Time
View Runtime Graph
Efficiency
View Efficiency Graph
Number of battery filled slots
0
Battery recharge time
1.5 h
Number of battery replacement quantity
1
Battery voltage
192 V
Battery charger power
597 W rated
Battery life
3…5 year(s)
Replacement battery
APCRBC140
Extended runtime
1
product web sub-family
High density
Number of power module free slots
0
Number of power module filled slots
0
Redundant
No
Colour
Black
height
17.4 cm
Width
43.2 cm
Depth
71.94 cm
Net weight
60 kg
Mounting location
Front
Mounting preference
Lower
Mounting mode
Rack-mounted
Two post mountable
0
USB compatible
Yes
Mounting position
Horizontal
Network frequency
40...70 Hz auto-sensing
Number of input connectors
1 hard wire 3-wire (1P + N + E)
Input voltage limits
100...275 V adjustable (half load)
Maximum configurable power in W
6000 W
Harmonic distortion
Less than 2 %
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
bypass type
Internal bypass (automatic and manual)
Maximum configurable power in VA
6000 VA
product certifications
CE EAC IRAM RCM VDE
Marking
CE Mark
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...10000 ft
Ambient air temperature for storage
-15…45 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0.00…15240.00 m
Acoustic level
55 dBA
Heat dissipation
1300 Btu/h
IP degree of protection
IP20
Free slots
1
Preinstalled device
Network management card 3 with environmental monitoring
Alarm
Audible and visible alarms : prioritized by severity
Emergency power off
Yes
Surge energy rate
480 J
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
37 cm
Package 1 Width
61 cm
Package 1 Length
96 cm
Package 1 Weight
67 kg
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Datasheet