Trade Price
£3,157.91
Per
1
Unit
EA
Pack Quantity
1
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 1500VA on-line 2U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with BS1363A British, IEC 320 C20, and Schuko CEE 7/EU1-16P inputs, and 6x IEC 320 C13 outlets. The UPS has a preinstalled Network Management Card for UPS network-based monitoring and management. It comes with BS1363A British, IEC 60320 C20, and Schuko CEE 7/EU1-16P inputs, 6x IEC 60320 C13 outlets. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. It conforms to CE and EAC. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.
Presentation
High density, double-conversion on-line power protection with scalable runtime.
Lead time
Usually in Stock
Main Input Voltage
230 V
Main Output Voltage
230 V
Other Output Voltage
220 V 240 V
Rated power in W
1500 W
Rated power in VA
1500 VA
Input Connection Type
BS1363A British IEC 60320 C14 Schuko CEE 7 / EU1-16P
output connection type
6 IEC 60320 C13
Number of rack unit
2U
Cable length
1.83 m
Number of cables
1
Battery type
Lead-acid battery
Provided equipment
CD with software Communication cable Country-specific detachable power cord Documentation CD Installation guide Network management card Rack mounting hardware Rack mounting brackets Rack mounting support rails Temperature probe USB cable Warranty card
Run Time
View Runtime Graph
Number of battery filled slots
1
Number of battery free slots
0
Battery recharge time
3 h
Battery voltage
48 V
Battery charger power
108 W rated
Battery life
3…5 year(s)
Replacement battery
APCRBC155
Extended runtime
1
product web sub-family
High density
Number of power module free slots
0
Number of power module filled slots
0
Redundant
No
Colour
Black
height
8.5 cm
Width
43.2 cm
Depth
50.5 cm
Net weight
21 kg
Mounting preference
No preference
Mounting mode
Rack-mounted
Two post mountable
0
USB compatible
Yes
Mounting position
Vertical
Network frequency
40...70 Hz auto-sensing
Input voltage limits
100...275 V 40% load 176...275 V full load
Maximum configurable power in W
1500 W
Harmonic distortion
Less than 2 %
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
bypass type
Built-in bypass
Maximum configurable power in VA
1500 VA
product certifications
CE EAC
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...10000 ft
Ambient air temperature for storage
-20…50 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0.00…15240.00 m
Acoustic level
50 dBA
Heat dissipation
317 Btu/h
IP degree of protection
IP20
Free slots
0
Preinstalled device
Network management card 3 with environmental monitoring
Alarm
Audible and visible alarms : prioritized by severity
Emergency power off
Yes
Surge energy rate
432 J
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
24.6 cm
Package 1 Width
74.9 cm
Package 1 Length
59.4 cm
Package 1 Weight
29.6 kg
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Datasheet