PCSN060Y4CH00
AccuSine PCSn 60A chassis IP00
Trade Price
£10,459.28
Per
1
Unit
EA
Pack Quantity
1
Information
This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. In addition to 3-phase mitigation, it has the ability to compensate for neutral harmonic currents. This version is UL Type OPEN, or ingress protection IP00, and can be connected on Low Voltage networks rated 208 Volt to 415 Volt. It is specified for a standard Root Mean Square output current rating of 60 Amps, 180 Amps neutral. The chassis is floor standing, allow cable entry from bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, IBC 2015, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4 Class A, IEC 61439-1 and IEEE 519-2014. Up to 12 units in parallel per set of CT; any size unit combination possible (subject to network characteristics). Master capable. Frame exterior dimensions are 440 millimetres in width, 265 millimetres in depth, 960 millimetres in height and product weight 75 kg.
Technical Specifications
Range of product
AccuSine
Product name
AccuSine PCSn
Product or component type
Active harmonic filter
Network type
3P 3P + N
Network configuration
3 or 4 wires
Network rated voltage
208…415 V AC
Network frequency
50/60 Hz
Maximum permissible voltage
1.1 x Un
RMS output current rating
60 A
Reactive power rating
43.2 kvar 415 V AC 50/60 Hz
Operating modes
Phase harmonic correction Neutral harmonic correction Mains current balancing Power factor correction
Installation location
Indoor
Mounting mode
Chassis
Protection type
Without protection
Heat dissipation
Rear plenum with forced ventilation for high heat flow
Electromagnetic compatibility
Electromagnetic emission, class A conforming to EN 61000-6-4 Electromagnetic immunity conforming to EN 61000-6-2
accessibility for operation
Front
Location of connection
Bottom
Enclosure degree of protection
IP00
Environmental characteristic
Operating: 3C2 conforming to IEC 60721-3-3 Operating: 3S2 conforming to IEC 60721-3-3 Storage: 3C3 conforming to IEC 60721-3-3 Storage: 3S3 conforming to IEC 60721-3-3
Operating altitude
<= 1000 m 1 % per 100 m 0...4800 m
Ambient air temperature for operation
0…40 °C 0…50 °C maximum with current derating of 2 % per °C above 40 °C
Relative humidity
0…95 % non-condensing
PCBA protection
Conformal coated
standards
IEC 62477-1 IEC 61439-1 EN 61000-6-2 EN 61000-6-4 ISO 9001 IEEE 519-2014 UL 508
product certifications
RCM EAC CE ABS IBC 2015 (Seismic) ICC-ES AC156 cULus
Ambient air temperature for storage
-20…60 °C
Net weight
68.6 kg
height
960 mm
Width
440 mm
Colour
Light grey (RAL 7035)
Depth
265 mm
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
26.4 cm
Package 1 Width
46.5 cm
Package 1 Length
96.0 cm
Package 1 Weight
68.492 kg
Warranty
18 months
Document Links
Datasheet