Trade Price
£64.06
Per
1
Unit
EA
Pack Quantity
1
This Acti9 iTLi is a modular impulse relay. It is a changeover contact with 1 normally open and 1 normally close contact. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 24VAC or 12VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
range of product
Acti9
Product name
Acti9 iTL
Product or component type
Impulse relay
Device short name
iTLi
Device application
Changeover relay
Poles
2P
Pole contact composition
1 NO + 1 NC
[In] rated current
16 A
Network type
AC
[Uc] control circuit voltage
24 V AC 50/60 Hz 12 V DC
Network frequency
50/60 Hz
[Ue] rated operational voltage
250 V AC 50/60 Hz
Control type
Remote and manual control Coil deconnection
control signal type
Impulse
Switching frequency
5 switching operations/minute 100 switching operations/day
impulse duration
50 ms...1 s
Remote control type
Illuminated push-button 3 mA
Local signalling
ON/OFF indication
Mounting mode
Fixed
mounting support
DIN rail
9 mm pitches
2
height
84 mm
Width
18 mm
Depth
60 mm
Electrical durability
AC-21: 200000 cycles AC-22: 100000 cycles
Connections - terminals
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferrule
Wire stripping length
11 mm
Tightening torque
1 N.m
Range compatibility
Acti 9 iATEt Acti 9 iATLc Acti 9 iATLc+s Acti 9 iATLm Acti 9 iATLs Acti 9 iETL iTL 16 Acti 9 iATLc+c
standards
EN 669-2-2 EN 669-1
product certifications
GOST CCC
Quality labels
CEBEC NF IMQ VDE KEMA
Noise level
60 dB
IP degree of protection
IP20 conforming to IEC 60529 (on opening) IP40 conforming to IEC 60529 (in enclosure)
Pollution degree
3
Tropicalisation
2
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-20…50 °C
Ambient air temperature for storage
-40…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.5 cm
Package 1 Width
1.7 cm
Package 1 Length
8.5 cm
Package 1 Weight
112 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8 cm
Package 2 Width
9.1 cm
Package 2 Length
23 cm
Package 2 Weight
1.398 kg
Unit Type of Package 3
S03
Number of Units in Package 3
144
Package 3 Height
30 cm
Package 3 Width
30 cm
Package 3 Length
40 cm
Package 3 Weight
17.563 kg
Warranty
18 months