A9MEM2000
Energy Meter 40A
Trade Price
£139.34
Per
1
Unit
EA
Pack Quantity
1
Information
The Acti9 iEM2000 series energy meters offer an attractive range of single-phase DIN rail-mounted energy meters fitted for sub-billing or partial meter applications. This product family can be used to monitor power consumption for each floor, office sector, or unit and allocate energy cost for building management. It feature a 7 digits mechanical display to display active energy. Providing Class 1 active energy accuracy per IEC 62053-21 standard, the meter will measure Active Energy. Suitable for a 230VAC network, with a supply voltage range of 184 to 276 VAC at 50Hz or 60Hz. Direct connect current measurement up to 40A with 32 samples per cycle only in a Single Phase and Neutral configuration. No communication port available. Product dimensions are as follows: width 18 mm, depth 67 mm, height 95 mm and product weight 73 g. This version is compliant with the standard EN 50470-3 class B, Measuring Instruments Directive (MID). Compatible with power management software to take advantage of the IoT digital power installation.
Technical Specifications
Range
Acti9
family
Acti9 iEM2000
Device short name
iEM2000
Product or component type
Energy meter
Poles description
1P + N
Type of measurement
Active power
Device application
Sub billing
Accuracy class
Class 1 active energy conforming to IEC 62053-21 Class B active energy conforming to EN 50470-3
Input type
Direct input
Maximum current [Imax]
40 A
[Ib] basic current
5 A
Rated current
40 A
Rated voltage
230 V +/- 20 %
Network frequency
50 Hz 60 Hz
Frequency measurement range
48…62 Hz
Technology type
Electronic
Display type
Electromechanical
Sampling rate
32 samples/cycle
Measurement current
0.25…40 A
Display digits
7
Maximum value measured
999999.9 kWh
Communication port protocol
-
Communication port support
-
Local signalling
Green indicator light: power ON Yellow indicator light: metering and activity 3200 p/kWh
Digital inputs
0
Maximum power consumption in VA
10 VA at 240 V AC
Mounting mode
Clip-on
mounting support
DIN rail
Connections - terminals
Power circuit: tunnel type terminals (bottom) 1 10 mm² cable(s)
Tightening torque
Power circuit: 1.2 N.m
standards
IEC 62053-21 IEC 61557-12 EN 50470-3
Product certifications
CE MID-D EAC EAC (metrology) MID-B
IP degree of protection
IP40 front panel: conforming to IEC 60529 IP20 casing:
Ambient air temperature for operation
-10…55 °C -20…55 °C
Ambient air temperature for storage
-40…70 °C
Operating altitude
< 2000 m
Relative humidity
0…95 % at 55 °C
Colour
White
9 mm pitches
2
Width
18 mm
height
96.5 mm
Depth
69 mm
Net weight
0.073 kg
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.2 cm
Package 1 Width
7.2 cm
Package 1 Length
10.0 cm
Package 1 Weight
115.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
38
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
4.711 kg
Warranty
18 months