Trade Price
£915.41
Per
1
Unit
EA
Pack Quantity
1
This Acti9 iQuick PRD40r surge arrester protects 3P+N residential and larger buildings installations against indirect transient overvoltages. This Type 2 device autoprotected by an integrated circuit-breaker is recommanded for high risk level in incoming panel board. It offers remote reporting of the 'cartridge must be changed' message. This prewired surge arrester allows quick replacement of withdrawable cartridges when they are damaged. It incorporates its end of life safety disconnector. The Isc integrated breaking capacity is 20kA. This Acti9 iQuick PRD40r is compatible with TT and TN-S earthing system. The Imax maximum discharge current is 40kA. The In nominal discharge current is 20kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode is 264VAC between neutral and earth, and is 350VAC between phase and earth. The Up voltage protection level in differential mode (between phase and neutral) is below or equal to 2.5kV. The Up Voltage protection level in common mode is below or equal to 1.5kV between phase and earth, or neutral and earth. The Un rated service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 131.5mm x (H) 103.8mm x (D) 75.9mm. The width in 9mm pitches is 15. The weight is 850g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. This product complies with IEC/EN 60947-5-1 and EN 61643-11: 2012 Type 2, IEC 61643-11: 2011 T2 standards.
range of product
Acti9
Product name
Acti9 iQuick PRD
Product or component type
Surge arrester with pluggable cartridge
Device short name
iQuick PRD40r
Device application
Distribution
Standards
EN 61643-11:2012 IEC 61643-11:2011
product certifications
CE
Quality labels
KEMA-KEUR NF
Poles description
3P + N
Remote signalling
With
Signal contacts composition
1 SD (1 C/O)
Surge arrester type
Electrical distribution network
Earthing system
TN-S TT
Surge arrester class type
Type 2
Surge arrester technology
MOV + GDT
[Ue] rated operational voltage
230/400 V AC (+/- 10 %) at 50/60 Hz
[In] nominal discharge current
Common mode: 20 kA (L/PE) Common mode: 20 kA (N/PE) Differential mode: 20 kA (L/N)
[Imax] maximum discharge current
Common mode: 40 kA L/PE Common mode: 40 kA N/PE Differential mode: 40 kA L/N
[Uc] maximum continuous operating voltage
Common mode: 264 V N/PE Common mode: 350 V L/PE Differential mode: 350 V L/N
Maximum [Up] voltage protection level
Common mode <1.5 kV type 2 L/PE Common mode <1.5 kV type 2 N/PE Differential mode <2.5 kV type 2 L/N
Disconnector device type
Integrated circuit breaker - Icu 20 kA
Signalling circuit voltage
2 A/250 V AC 50/60 Hz
Mounting mode
Clip-on (DIN rail)
9 mm pitches
14.7
height
94 mm
Width
131.5 mm
Depth
75.9 mm
Net weight
0.86 kg
Colour
White (RAL 9003)
Connections - terminals
Tunnel type terminal (upside) 2.5…35 mm² Tunnel type terminal (downside) 2.5…25 mm²
Tightening torque
2.5 N.m
IK degree of protection
IK05 conforming to IEC 62262
Relative humidity
5…90 %
Operating altitude
2000 m
ambient air temperature for operation
-25…60 °C
Ambient air temperature for storage
-40…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.500 cm
Package 1 Width
11.000 cm
Package 1 Length
15.500 cm
Package 1 Weight
891.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
12
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
11.180 kg
Warranty
18 months
Datasheet