A9L16295
IQUICK PRD 1PN 20R WITH REMOTE TRANSFER
Trade Price
£404.48
Per
1
Unit
EA
Pack Quantity
1
Information
This Acti9 iQuick PRD20r surge arrester protects 1P+N residential and larger buildings installations against indirect transient overvoltages. This Type 2 device autoprotected by an integrated circuit-breaker is recommended for moderate risk level in incoming panel board. It offers remote reporting of the "cartridge must be changed" message. This prewired surge arrester allows quick replacement of withdrawable cartridges when they are damaged. It incorporates its end of life safety disconnector. The Isc integrated breaking capacity is 25kA. This Acti9 iQuick PRD20r is compatible with TT and TN-S earthing system. The Imax maximum discharge current is 20kA. The In nominal discharge current is 5kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode (between neutral and earth) is 264VAC. The Up Voltage protection level in differential mode (between phase and neutral) is below or equal to 1.7kV. The Up Voltage protection level in common mode (between neutral and earth) is below or equal to 1.7kV. The Un rated service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 72mm x (H) 103.9mm x (D) 75.9mm. The width in 9mm pitches is 8. The weight is 435g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to +60°C. The storage temperature is -40°C to +85°C. This product complies with IEC/EN 60947-5-1 and EN 61643-11: 2012 and IEC 61643-11: 2011 Type 2 standards.
Technical Specifications
range of product
Acti9
Product name
Acti9 iQuick PRD
Product or component type
Surge arrester with pluggable cartridge
Device short name
iQuick PRD20r
Device application
Distribution
Standards
EN 61643-11:2012 IEC 61643-11:2011
product certifications
CE
Quality labels
NF KEMA-KEUR
Poles description
1P + N
Remote signalling
With
Signal contacts composition
1 SD (1 C/O)
Surge arrester type
Electrical distribution network
Earthing system
TT TN-S
Surge arrester class type
Type 2
Surge arrester technology
MOV + GDT
[Ue] rated operational voltage
230 V AC (+/- 10 %) at 50/60 Hz
[In] nominal discharge current
Common mode: 5 kA (L/PE) Common mode: 5 kA (N/PE) Differential mode: 5 kA (L/N)
[Imax] maximum discharge current
Common mode: 20 kA L/PE Common mode: 20 kA N/PE Differential mode: 20 kA L/N
[Uc] maximum continuous operating voltage
Common mode: 264 V N/PE Differential mode: 350 V L/N
Maximum [Up] voltage protection level
Common mode <1.7 kV type 2 N/PE Differential mode <1.7 kV type 2 L/N
[Ut] temporary overvoltage
1200 V N/PE 200 ms withstand 415 V L/N 5 s withstand 440 V L/N 7200 s safe failure mode
[Isccr] short-circuit current rating
25 kA
Disconnector device type
Integrated circuit breaker - Icu 25 kA
Signalling circuit voltage
2 A/250 V AC 50/60 Hz
Mounting mode
Clip-on (DIN rail)
9 mm pitches
8
height
91.4 mm
Width
72 mm
Depth
75.9 mm
Net weight
435 g
Colour
White (RAL 9003)
[Ipe] Ground residual current
1 mA
Connections - terminals
Tunnel type terminal (L/N) 2.5…25 mm² rigid Tunnel type terminal (ground) 2.5…25 mm² rigid Tunnel type terminal (L/N) 2.5…25 mm² flexible Tunnel type terminal (ground) 2.5…25 mm² flexible Tunnel type terminal (L/N) 2.5…35 mm² flexible with ferrule Tunnel type terminal (ground) 2.5…25 mm² flexible with ferrule
Wire stripping length
11 mm
Tightening torque
2.5 N.m
IK degree of protection
IK05 conforming to IEC 62262
Relative humidity
5…95 %
Operating altitude
2000 m
Ambient air temperature for operation
-25…60 °C
Ambient air temperature for storage
-40…80 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.0 cm
Package 1 Width
9.0 cm
Package 1 Length
10.0 cm
Package 1 Weight
481.0 g
Unit Type of Package 2
S03
Number of Units in Package 2
27
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
13.433 kg
Warranty
18 months
Document Links
Datasheet