BMXSDI1602
X80 DIG 16I SIL3 24VDC SINK
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This discrete input module offers 16 inputs with positive discrete input logic. It is a module with discrete input voltage of 24V DC with current sink positive logic. It is the Modicon digital input module dedicated to M580 safety systems. It features 16 Type 3 inputs, in two groups of 8 non-isolated inputs. It is an IP20 rated product. It weighs 0.115kg. It is suitable for safety most demanding applications. This product is certified by CE and UL, and also by ATEX and IECEx for use in explosive atmospheres. It complies up to SIL 3, Category 4, PLd. It is to be used with BMXFTB2000 caged terminal block. The I/O module height is larger than the height of a rack (Ethernet or X-bus) and should be considered before installing the rack. It can be installed either in a local or a remote rack. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.
Technical Specifications
Range of product
Modicon X80
Product or component type
Discrete input module
Discrete input number
16
Discrete input type
Not isolated
input type
Current sink (logic positive)
Discrete input voltage
24 V DC, discrete input logic: positive
Discrete input current
3.2 mA
Input compatibility
With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2
Sensor power supply
19...30 V
Current state 1 guaranteed
>= 2 mA
Current state 0 guaranteed
<= 1.5 mA
Input impedance
7500 Ohm
Insulation resistance
> 10 MOhm 500 V DC
Power dissipation in W
3.57 W
DC typical response time
6 ms
DC maximum response time
6 ms
Paralleling of inputs
Yes
Typical current consumption
256 mA at 3.3 V DC 100 mA at 24 V
MTBF reliability
265000 H
Protection type
reverse polarity protection External overload protection0.5 A fast blow
Voltage detection threshold
< 14 V DC sensor fault > 18 V DC sensor OK
Status LED
1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O
Net weight
0.115 kg
IP degree of protection
IP20
Environmental characteristic
Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2
Dielectric strength
1500 V AC at 50/60 Hz 1 minute, primary/secondary
Vibration resistance
3 gn
Shock resistance
15 gn
Ambient air temperature for storage
-40…85 °C
Ambient air temperature for operation
-25…60 °C
Relative humidity
5…95 % at 55 °C without condensation
Protective treatment
Conformal coating
Operating altitude
0...2000 m 2000...5000 m with derating factor
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.500 cm
Package 1 Width
18.000 cm
Package 1 Length
26.000 cm
Package 1 Weight
331.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
8
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.136 kg
Warranty
18 months
Document Links
Datasheet