Article number:

VX 5307.157

Material

Sheet steel

Aluminium

Plastic

Glazed door: Single-pane safety glass, 3 mm

Surface finish

Enclosure frame: Dipcoat-primed

Interior installation: Spray-finished

Rear panel and roof: Dipcoat-primed, powder-coated

Front door: Aluminium, anodised/spray-finished

Colour

Enclosure frame, rear panel and roof: RAL 7035

Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005

Interior installation, base/plinth: RAL 9005

Handle and hinges: RAL 9005

Supply includes

Enclosure frame with doors and roof plate

Glazed aluminium door at the front (180°), with comfort handle for semi-cylinder and security lock 3524 E

Rear panel

Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate

Base module mounted at front as infill panel

Swing frame, large, with side trim panel for the installation of 482.6 mm (19") mounting components whilst utilising the full rack height, 130°

Side panels, one-piece, for screw fastening

Base/plinth system VX, 100 mm, vented

Base/plinth corner pieces and trim panels, sides, screw-fastened

Base/plinth trim panels, front and rear plus corner and baying covers supplied loose

4 levelling feet, M12, including base/plinth adaptor (supplied loose)

Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.

12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)

25 multi-tooth screws, conductive (supplied loose)

4 combination rails for inner and outer mounting level, to fit rack depth (supplied loose)

10 cable shunting rings, metal, 125 x 65 mm (supplied loose)

IPPC pallet

Base module mounted at front as infill panel, depth 175 mm

Dimensions

Width: 800 mm

Height: 2,000 mm

Depth: 800 mm

Units

40 U

Height including base/plinth

2,100 mm

Free mounting space to the 482.6 mm (19") level, front/rear

150 mm / 520 mm

Design

Swivel frame

Cover version

multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate

Mounting angle version

Swing frame

Base design

Base module mounted at front as infill panel

482.6 mm (19") level(s) version

Swing frame, 482.6 mm (19"), fitted

Load capacity

3,500 N

IK Code

IK08

Note

Depending on how and where it is sited, the door opening angle may vary for selected applications

Basic material

Sheet steel

Construction rear door

Rear panel

Construction front door

Glazed aluminium door, solid, one-piece, 180° hinges

Packs of

1 pc(s).

Weight/pack

150 kg

EAN

4028177944985

ETIM 7.0

EC002499

ECLASS 8.0

27180207