64281127P

XCP-S Rising mains feed unit - Right type 2 - Al - 2000A

Trade Price

POA

Per

Unit

Pack Quantity

64281127P

Information

The rising mains feed units are used at the departure of the riser mains lines, when the busbar must be placed close to the wall and powered using cables. They allow the busbar to be installed 40 mm away from the wall. Right-hand feed units do not come with a Monobloc but left-hand feed units come with a pre-fitted Monobloc. They are available with non-standard execution, on request. End feed units for single bar busbars are supplied with an aluminium blind back closing plate. For double bar busbar trunking systems the plates are 2. Both versions are fitted with 2 extra side steel flanges and 2 inspection steel flanges (dark grey colour). The cable is connected directly to the busbars using bolts. For more information on board/busbar connection see the tables below (Dimensions For The Box). To feed the power supply cable through the back power supply flanges it will be necessary to drill a hole in case of single bar and two holes in case of double bar. The size of the holes is 170 x 410 mm.

Document Links

Datasheet

Technical

In (A)

2000

Material

Al

Type

Rising mains feed unit - Right type 2