CI-K2-PKZ0

Enclosure, insulated, IP41, PKZ0

Trade Price

£18.70

Per

1

Unit

EACH

Pack Quantity

1

CI-K2-PKZ0
CI-K2-PKZ0
CI-K2-PKZ0

Information

Eaton Moeller® series CI-K Insulated enclosure, for PKZ0, +cut-out 45mm, IP40_x

Technical Specifications

Product Length/Depth

105 mm

Product Height

180 mm

Product Width

100 mm

Product Weight

0.33 kg

Certifications

CE

Catalog Notes

Additional cable insertion membrane as cable entry gland: 2 x in the rear wall and 1 x at the bottom.

Enclosure material

Plastic

Fitted with:

N and PE terminal

Cover with aperture dimensioned to accommodate front of breaker

Knockouts

2 x M25 (cable entry knockout at the top)

2 x M25 (cable entry knockout at the bottom)

Degree of protection

IP41, when mounted vertically

IP40

NEMA Other

Degree of protection (front side)

IP40

Model

Surface mounting

Product category

Accessories

Used with

PKZ0

+L-PKZ0 (2 units), +NHI or AGM, +U or A, PKZM0-…

Ambient operating temperature - min

-25 °C

Ambient operating temperature - max

70 °C

Equipment heat dissipation, current-dependent Pvid

0 W

Heat dissipation capacity Pdiss

10 W

Heat dissipation per pole, current-dependent Pvid

0 W

Rated operational current for specified heat dissipation (In)

0 A

Static heat dissipation, non-current-dependent Pvs

0 W

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

Please enquire

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Document Links

Datasheet