CI-K4-PKZ4-GR

Enclosure, red/yel handle, IP65

Trade Price

£72.02

Per

1

Unit

EACH

Pack Quantity

1

CI-K4-PKZ4-GR
CI-K4-PKZ4-GR
CI-K4-PKZ4-GR

Information

Eaton Moeller® series CI-K Insulated enclosure for PKZ4, +rotary handle, red/yellow

Technical Specifications

Product Length/Depth

240 mm

Product Height

220 mm

Product Width

160 mm

Product Weight

1.755 kg

Compliances

CE

Enclosure material

Plastic

Fitted with:

Red-yellow rotary knob, for use as EMERGENCY STOP switch (according to EN 60204)

Insulated PE(N) terminal

Knockouts

1 x M20 (cable entry knockout for cable entry glands at the bottom)

2 x M25/32 (cable entry knockout at the top)

Hard mirror with cable entry knockouts (can be cut out)

2 x M25/32 (cable entry knockout at the bottom)

2 x M25/M32 (cable entry knockouts at the rear)

1 x M20 (cable entry knockout for cable entry glands at the top)

Degree of protection

IP65

NEMA Other

Model

Surface mounting

Product category

Accessories

Suitable for

Emergency stop

Ambient operating temperature - min

-25 °C

Ambient operating temperature - max

70 °C

Equipment heat dissipation, current-dependent Pvid

0 W

Heat dissipation capacity Pdiss

29.5 W

Heat dissipation per pole, current-dependent Pvid

0 W

Rated operational current for specified heat dissipation (In)

0 A

Static heat dissipation, non-current-dependent Pvs

0 W

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

Please enquire

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Document Links

Datasheet