QT602ERS
Quantec Addressable Infrared Call Point, Button Reset c/w Iconised Label, Sounder & Remote Socket
Trade Price
£65.69
Per
1
Unit
EACH
Pack Quantity
Information
A programmable Quantec addressable call point c/w iconised label, infrared receiver, call follower sounder and remote jack socket. Includes a Call button, Reset buttons and red/green confidence light. Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters. Can make up to 7 levels of call – Standard, Ensuite, Help Required, Emergency, Attack, Presence & Attendance (dependent on configuration and ancillary devices used). Remote socket allows the connection of optional tail call leads, pressure mats, etc. Can be programmed to operate in a multitude of ways using a QT423 configurator. Connections provided for additional slave devices such as ceiling pulls, overdoor lights, slave infrared receivers and more. Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night mode (see Technical Specifications for further details). QT602ERSM magnetic reset version also available.
Technical Specifications
Power requirements
Nominal 24V DC (from Quantec Controller/Network)
Quiescent current
Less than 3mA.
Alarm current
14mA.
Indicators
Red/green confidence LED.
Controls
Iconised Call button; Iconised Reset button. (QT602ERSM magnetic reset version also available).
Connections
Net +: Net -; R; G; L+; SW; IR; SLV.
Expansion connections
R; G; L+; SW; IR & SLV terminals allow the connection of optional slave overdoor lights, slave call points, slave ceiling pulls and slave infrared receivers.
Onboard 6.35mm Remote Jack Socket
Yes – for the optional connection of tail call leads/pear pushes, pressure mats and movement detectors.
Onboard Sounder
Yes – can be optionally used for Quantec's Call Follower Sounder feature (if Quantec is in Night mode and the call point is in Presence, the call point will emit a soft tone to let staff know if a
Onboard Infrared Receiver
Yes – will accept calls from compatible Quantec infrared transmitter.
Product dimensions (mm)
87 W x 87 H x 33 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finish
Plastic.
IP Rating
IP20.
Weight
74g.
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Product dimensions:
87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Document Links
Datasheet