QT602E
Quantec Addressable Call Point, Button Reset c/w Iconised Label & Remote Socket
Trade Price
£51.56
Per
1
Unit
EACH
Pack Quantity
Information
A programmable addressable call point c/w iconised label and remote jack socket for use with C-TEC’s Quantec Addressable Call System. Includes a Call button, Reset button and red/green confidence light. Can make up to 5 levels of call – Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible slave infrared receiver. Remote socket allows the connection of optional tail call leads, pressure mats, etc. Can be programmed to operate in a multitude of ways using a QT423 configurator. Connections provided for additional slave devices such as ceiling pulls, overdoor lights, slave infrared receivers and more. QT602EM magnetic reset version also available.
Technical Specifications
Power requirements
Nominal 24V DC (from Quantec Controller/Network)
Quiescent current
Less than 3mA.
Alarm current
14mA.
Indicators
Red/green confidence LED.
Controls
Iconised Call button; Iconised Reset button. (QT602EM magnetic reset version also available).
Connections
Net +: Net -; R; G; L+; SW; IR; SLV.
Expansion connections
R; G; L+; SW; IR & SLV terminals allow the connection of optional slave overdoor lights, slave call points, slave ceiling pulls and slave infrared receivers.
Onboard 6.35mm Remote Jack Socket
Yes – for the optional connection of tail call leads/pear pushes, pressure mats and movement detectors.
Onboard Sounder
No,
Onboard Infrared Receiver
No.
Product dimensions (mm)
86 W x 86 H x 30 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finish
Plastic.
IP Rating
IP20.
Weight
72g.
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Product dimensions:
87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Document Links
Datasheet