1SVR427033R3000
CP-E 5/3.0 Power supply 5v 3A (CP-E 5/3.0)
Trade Price
£102.07
Per
1
Unit
EA
Pack Quantity
1
Information
The CP-E 5/3.0 is a power supply from the CP-E range. The primary switch mode power supply offers a wide range input of 90-264 V AC and 120-375 V DC, rated input voltage is 100-240 V AC. The rated output power is 15 W, rated output current is 3.0 A at an output voltage of 5 V DC. The output voltage is adjustable within a range of 4.5 to 5.75 V DC. The output characteristic is hiccup-mode. The power supply allows parallel operation to enable redundancy. A redundancy unit is available as accessory.
Technical Specifications
Minimum Order Quantity
1 piece
Customs Tariff Number
85044095
Product Net Width
22.5 mm
Product Net Height
90 mm
Product Net Depth / Length
114 mm
Product Net Weight
0.144 kg
Package Level 1 Width
134 mm
Package Level 1 Depth / Length
157 mm
Package Level 1 Height
39 mm
Package Level 1 Gross Weight
0.213 kg
Package Level 1 EAN
4016779656894
Package Level 1 Units
box 1 piece
Function
Switch mode power supply
Number of Phases
1
Rated Input Voltage (UIN)
100 ... 240 V AC
Input Voltage (Uin)
90 ... 264 V AC120 ... 375 V DC
Rated Frequency (f)
50 Hz
Rated Frequency Limits
47 ... 63 Hz
Characteristic of Output
Hiccup-mode
Rated Output Power
15 W
Output Power
15 W
Rated Output Voltage
5 V DC
Output Voltage (Uout)
5 V DC
Rated Output Current
3 A
Output Current
3 A
Rated Impulse Withstand Voltage (Uimp)
Input Circuit / Output Circuit 4 kVInput Circuit / PE 2.5 kVInput Circuit / Relay Contact 4 kVOutput Circuit / PE 0.5 kV
Rated Insulation Voltage (Ui)
Input Circuit / Output Circuit 300 VInput Circuit / PE 300 VInput Circuit / Relay Contact 300 VOutput Circuit / PE 50 V
Degree of Protection
Housing IP20Terminals IP20
Connecting Capacity Input Circuit
Flexible with Ferrule 0.2 ... 2.5 mm²Rigid 0.2 ... 2.5 mm²
Connecting Capacity Output Circuit
Flexible with Ferrule 0.2 .... 2.5 mm²Rigid 0.2 ... 2.5 mm²
Tightening Torque
Input Circuit 0.6 N·mOutput Circuit 0.6 N·m
Wire Stripping Length
Input Circuit 6 mmOutput Circuit 6 mm
Recommended Screw Driver
PH1
Minimum Mounting Distance
Electrical Conductive Board, Horizontal 25 mmElectrical Conductive Board, Vertical 25 mmOther Device Same Type, Horizontal 25 mmOther Device Same Type, Vertical 25 mm
Mounting Position
1
Mounting on DIN Rail
TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
Standards
ANSI/ISA-12.12CAN/CSA C22.2 No.107.1CAN/CSA C22.2 No.213CAN/CSA C22.2 No.223CAN/CSA C22.2 No.60950IEC/EN 63000IEC 60950-1IEC/EN 61000-6-2IEC/EN 61000-6-3UL 1310UL 508UL 60950
Ambient Air Temperature
Operation -20 ... +70 °CStorage -25 ... +85 °C
Maximum Operating Altitude Permissible
5000 m
RoHS Status
Following EU Directive 2011/65/EU
Connecting Capacity Input Circuit UL/CSA
Rigid 24-14 AWG
Connecting Capacity Output Circuit UL/CSA
Rigid 24-14 AWG
Tightening Torque UL/CSA
Input Circuit 5 in·lbOutput Circuit 5 in·lb
Electrostatic Discharge (ESD Immunity) acc. to IEC 61000-4-2
Level 4 Air Discharge 15 kVLevel 4 Contact Discharge 8 kV
Radiated Electromagnetic Field Immunity acc. to IEC 61000-4-3
Level 3 10 V/m
Electrical Fast Transient (Burst Immunity) acc. to IEC 61000-4-4
Level 4 Power Supply Port Signal 4 kV
Surge Immunity acc. to IEC 61000-4-5
Level 3 Line-to-Line 2 kVLevel 4 Line-to-Ground 4 kV
Conducted Disturbances Immunity acc. to IEC 61000-4-6
Level 3 10 V
Electromagnetic Compatibility (EMC)
Immunity - Class BEmission - Class B
Object Classification Code
T
ETIM 4
EC002540 - DC-power supply
ETIM 5
EC002540 - DC-power supply
ETIM 6
EC002540 - DC-power supply
ETIM 7
EC002540 - DC-power supply
ETIM 8
EC002540 - DC-power supply
eClass
V11.0 : 27040701
UNSPSC
39121004
E-Number (Finland)
2712839
Document Links
Datasheet