Trade Price
£50.81
Per
1
Unit
EA
Pack Quantity
1
The CP-D 12/0.83 is a power supply from the CP-D range. The primary switch mode power supply offers a wide range input of 90-264 V AC and 120-375 V DC, rated input voltage is 100-240 V AC. The rated output power is 10 W, rated output current is 0.83 A at an output voltage of 12 V DC. The power supply provides a U/I output characteristic.
Minimum Order Quantity:
1 piece
Customs Tariff Number:
85044095
Product Net Width:
18 mm
Product Net Height:
91 mm
Product Net Depth / Length:
57.5 mm
Product Net Weight:
0.066 kg
Package Level 1 Width:
91 mm
Package Level 1 Depth / Length:
134 mm
Package Level 1 Height:
34 mm
Package Level 1 Gross Weight:
0.111 kg
Package Level 1 EAN:
4016779661201
Package Level 1 Units:
box 1 piece
Function:
Switch mode power supply
Number of Phases:
1
Rated Input Voltage (UIN):
100 ... 240 V AC
Input Voltage (Uin):
90 ... 264 V AC120 ... 375 V DC
Rated Frequency (f):
50 Hz60 Hz
Rated Frequency Limits:
47 ... 63 Hz
Characteristic of Output:
Hiccup-mode
Rated Output Power:
10 W
Output Power:
10 W
Rated Output Voltage:
12 V DC
Output Voltage (Uout):
12 V DC
Rated Output Current:
0.83 A
Output Current:
0.83 A
Output Current Maximum (Iout):
0.83 A
Rated Impulse Withstand Voltage (Uimp):
Input Circuit / Output Circuit 3 kV
Rated Insulation Voltage (Ui):
Input Circuit / Output Circuit 300 VInput Circuit / PE 300 VOutput Circuit / PE 50 V
Degree of Protection:
Housing IP20Terminals IP20
Pollution Degree:
2
Connecting Capacity Input Circuit:
Flexible with Ferrule 0.2 ... 1.5 mm²Rigid 0.2 ... 2.5 mm²
Connecting Capacity Output Circuit:
Flexible with Ferrule 0.2 .... 2.5 mm²Rigid 0.2 ... 2.5 mm²
Tightening Torque:
Input Circuit 0.6 N·mOutput Circuit 0.6 N·m
Wire Stripping Length:
Input Circuit 4 mmOutput Circuit 4 mm
Recommended Screw Driver:
PH1
Minimum Mounting Distance:
Electrical Conductive Board, Horizontal 25 mmElectrical Conductive Board, Vertical 25 mmOther Device Same Type, Horizontal 25 mmOther Device Same Type, Vertical 25 mm
Mounting Position:
1
Mounting on DIN Rail:
TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
Standards:
CAN/CSA C22.2 No.107.1CAN/CSA C22.2 No.223CAN/CSA C22.2 No.60950IEC/EN 63000IEC 60950-1IEC/EN 61000-6-2IEC/EN 61000-6-3UL 1310UL 508UL 60950
Ambient Air Temperature:
Operation -40 ... +70 °CStorage -40 ... +85 °C
Maximum Operating Altitude Permissible:
4850 m
RoHS Status:
Following EU Directive 2011/65/EU
Connecting Capacity Input Circuit UL/CSA:
Rigid 24-12 AWG
Connecting Capacity Output Circuit UL/CSA:
Rigid 24-12 AWG
Tightening Torque UL/CSA:
Input Circuit 5 in·lbOutput Circuit 5 in·lb
Electrostatic Discharge (ESD Immunity) acc. to IEC 61000-4-2:
Level 4 Air Discharge 8 kVLevel 4 Contact Discharge 4 kV
Radiated Electromagnetic Field Immunity acc. to IEC 61000-4-3:
Level 3 10 V/m
Electrical Fast Transient (Burst Immunity) acc. to IEC 61000-4-4:
Level 4 Power Supply Port Signal 4 kV
Surge Immunity acc. to IEC 61000-4-5:
Level 3 Line-to-Line 2 kV
Conducted Disturbances Immunity acc. to IEC 61000-4-6:
Level 3 10 V
Electromagnetic Compatibility (EMC):
Emission - Class BImmunity - Class B
Object Classification Code:
T
ETIM 4:
EC002540 - DC-power supply
ETIM 5:
EC002540 - DC-power supply
ETIM 6:
EC002540 - DC-power supply
ETIM 7:
EC002540 - DC-power supply
ETIM 8:
EC002540 - DC-power supply
eClass:
V11.0 : 27040701
UNSPSC:
39121004
E-Number (Finland):
2712076
E-Number (Sweden):
5218727
Datasheet