Range

VigiPacT

Device short name

RHU

Product or component type

Residual current protection relay

Relay application

Monitoring relay Protection relay

mounting support

Front panel

Earth-leakage protection class

Type A

Type of setting

Modbus address Keypad

Residual earth-leakage sensitity adjustment type

Adjustable

Earth-leakage sensitivity

0.03…1 A, adjustable in step of 0.001 A 1…30 A, adjustable in step of 0.1 A

Earth-leakage time delay

Instantaneous for 0.03 A Adjustable 0…4.5 s for 0.03…30 A adjustable in step of 10 ms

Threshold setting

0.015...1 A adjustable in step of 0.001 A pre-alarm 1...30 A adjustable in step of 0.1 A pre-alarm 0.03...1 A adjustable in step of 0.001 A alarm 1...30 A adjustable in step of 0.1 A alarm

Current sensors compatibility

VigiPacT TOA earth leakage current sensor VigiPacT A earth leakage current sensor VigiPacT L earth leakage current sensor

[Ithe] conventional enclosed thermal current

8 A

Minimum load

10 mA at 12 V

[Us] rated supply voltage

220...240 V AC 50/60 Hz 70...110 %

Power consumption in VA

8 VA

Monitored distribution system

1000 V - AC at 50/60 Hz (maximum) 1000 V - AC at 400 Hz (maximum)

Earthing system

TT TN-S IT

[Uimp] rated impulse withstand voltage

8 kV

Reset

Remote reset

Test function

Remote test Remote test (via communication) Local

Signal contacts composition

1 C/O alarm fail-safe 1 NO pre-alarm fail-safe

Type of measurement

Earth fault current internal measurement, range: 20...200 %, accuracy: +/- 20 %

Refresh time

0.5 s

Communication service

Modbus slave

Tamperproof of settings

Protected by access code

Connections - terminals

Alarm circuit: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Alarm circuit: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12 Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12 Sensor: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Sensor: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12 Voltage presence: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Voltage presence: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12 Power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Power supply: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12 Pre alarm: terminal block cable(s) 0.2…2.5 mm² flexible AWG 22...AWG 12 Pre alarm: terminal block cable(s) 0.2…2.5 mm² rigid AWG 22...AWG 12

Wire stripping length

Alarm circuit: 6 mm Relay test and fault reset: 6 mm Sensor: 6 mm Voltage presence: 6 mm Power supply: 6 mm Pre alarm: 6 mm

Tightening torque

Alarm circuit: 0.5 N.m Relay test and fault reset: 0.5 N.m Sensor: 0.5 N.m Voltage presence: 0.5 N.m Power supply: 0.5 N.m Pre alarm: 0.5 N.m

Standards

EN/IEC 60947-2 Annex M EN/IEC 60755 UL 1053 CAN/CSA C22.2 No. 144

Width

72 mm

height

72 mm

Depth

117 mm

Cut-out dimensions

68 x 68 mm

Net weight

0.3 kg

IP degree of protection

IP40 front face: conforming to IEC 60529 IP30 other parts: conforming to IEC 60529 IP20 connection: conforming to IEC 60529

IK degree of protection

IK07 conforming to EN 50102

Mechanical robustness

Vibrations 13.2...100 Hz: 0.7 g Vibrations 2...13.2 Hz: +/- 1 mm

Environmental characteristic

Exposure to damp heat not in service conforming to IEC 60068-2-30 Exposure to damp heat in service conforming to IEC 60068-2-56 Salt mist conforming to IEC 60068-2-52

Overvoltage category

IV

Electrical shock protection class

Class II

Electromagnetic compatibility

Conducted and radiated emissions: , B, conforming to CISPR 11 Conducted radio-frequency immunity test: , 3, conforming to IEC 61000-4-6 Electrostatic discharge immunity test: , 4, conforming to IEC 61000-4-2 High-energy conducted susceptibility: , 4, conforming to IEC 61000-4-5 Low-energy conducted susceptibility: , 4, conforming to IEC 61000-4-4 Radiated susceptibility: , 3, conforming to IEC 61000-4-3

Relative humidity

95 % at 55 °C

Pollution degree

3 conforming to IEC 60664-1

ambient air temperature for operation

-25…55 °C

Ambient air temperature for storage

-40…85 °C

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

8.5 cm

Package 1 Width

11.0 cm

Package 1 Length

15.5 cm

Package 1 Weight

430.0 g

Unit Type of Package 2

S04

Number of Units in Package 2

24

Package 2 Height

30.0 cm

Package 2 Width

40.0 cm

Package 2 Length

60.0 cm

Package 2 Weight

11.086 kg

Warranty

18 months